An Easy Way to Paint Plantation Shutters

Giving Those Previous Shutters Some Shade

Know that there is an good way to paint plantation shutters. If the window coverings have lost their color through the years, you don't have to spend colors of money on replacing them, but you can merely repaint them. This will allow you not only to provide your old shutters some color and sparkle, but also refresh the look of your interior. This especially applies to several neutral colored shutters, since white or cream colors have a tendency to get dirty over time or otherwise damaged. Effectively, this is the perfect chance to start plantation shutters repainting project.

Try to plan all your steps before commencing the project. This way you will avoid potential problems down the road, since once you've commenced painting, it will be too late to go back. This includes getting all the things you need and determining the place you are likely to paint the wooden shutters at. Also, as you will need to take down the shades, make sure to remember (or even write down) everything you have done, since this way you'll have no problem in putting the shutters backup. Just follow the next few steps you may have a freshly coloured window treatment quickly.

Shutters and Blinds Brisbane Steps

As mentioned before, the first thing you will need to do is repulse the shutters from your window. It is important to correctly mark each solar panel, in order of going back them into the proper position, once the artwork is done. This also applies to hinges and other components, since any big difference can cause alignment difficulties. Once you have removed your shutters from the windows, it would be wise to get rid of all the hardware, just like hinges, hooks as well as knobs attached to the panels. This will only take a screwdriver and a few mins but it will save you on a regular basis of trying to cover or otherwise not mask these and even worse, try to get rid of paint that in some way ended up there. Additionally, use this opportunity to verify whether any hardware needs to be repaired as well as replaced.

The next step is proper cleaning of the panels. Make sure to this completely, since any dust or debris found on the surface will not only help it become harder for the fresh paint to stick but can also affect how clean will your fresh painted shutter surface search. This can be done by using only some mild cleaning soap and some warm water. Last but not least, do not start your painting before the surface is completely dry.

The following point you will have to do will be scrape the shades using some metal coloring scraper and some emery paper. This way you will get an even surface much easier to fresh paint. However, do not overdo the scraping as you don't want to damage the panels in any way.

Before using the paint to your plantation shutters, it would be wide to use some water dependent primer. Covering the entire surface with a slender coat of primer will allow the fresh paint to stick much easier, no matter which paint has been used before.

When it comes to the particular painting technique, either use a brush as well as some spray color. Although it may seem like enjoyable using a brush, it usually takes a long time (based on the size of the brush along with the size of your window shutters), but can also lead to potential problems for your shutter's functioning mechanism. Namely, there is a chance that a number of paint will get to the gaps between the louvers along with the frame (no matter how careful you are) which will, while dries later on, affect how smooth the shutters open or even close.

Once you've identified how you are going to color your plantation shutters, prepare the working place. You can hang the panels which will allow you to coloring both sides simultaneously or place them onto the floor, previously covered with a few newspaper or an old cloth, which means that you'll need to paint one side and once it is dry, switch the panel and paint the other 1.

Finally, you can start the shutters artwork job. If you have prefered a paint clean, use flat brushes in order of applying the paint more equally. Paint in clean, even strikes. In case you have decided to use spray paint, just move the can a long time before you start and use the paint rather vertically than horizontally. Maintain your can about Thirty centimeters from the solar panels and spray the colour smoothly with no unexpected moves which can lead to smudges and difference in color shades. 1 layer of color should do the trick, in case you want a more intense color, you can add another coating.
In the end of the shutters painting process, be sure that the paint provides dried completely along with reattach the shutters towards the window. If you have in the past marked their initial position and retained all the screws in one place, this should not be a difficult task. Take a step back and admire your work.

Take a look at Shaftesburys for more info upon our top end Plantation Shutters. For custom colour Shaftesburys can match fresh paint colors. Please deliver us your Dulux or perhaps Farrow & Ball color piece of fabric reference numbers, or perhaps actual color example, so we can match the color for you.